Advantages
No material distortion
Contour accuracy of ± 5 µm
Prototyping up to full-scale production
Treatment of hardened surfaces
Contact
What materials and materials thicknesses we can process?
Materials which are mentioned in the graph are our standard materials which we have on stock. Special materials are available on request. Besides stainless steel materials with special material properties we can deliver materials with e.g. higher tensile strength or higher fine grain degree.
Material | Min Thickness (mm) | Max Thickness (mm) |
---|---|---|
Stainless steel ST37 Stahl | 0,010 | 2,0 |
Tin Plates | 0,010 | 2,0 |
Aluminium AlMg3 | 0,010 | 1,5 |
Anodised Alu | 0,010 | 1,5 |
Copper Cu | 0,010 | 0,8 |
Copper/Berrylium CuBe | 0,010 | 0,8 |
Copper/Tin | 0,010 | 0,6 |
Brass CuZn | 0,010 | 1,0 |
Nickel | 0,1 | 1,0 |
Silver | 0,1 | 0,8 |
Nickel/Silver | 0,1 | 1,0 |
Titanium | 0,1 | 2,0 |
Tantal | 0,1 | 1,0 |
Gold Au | 0,2 | 0,8 |
Invar | 0,050 | 2,0 |
What type of iron steels we have on stock?
LaserJob has an extensive stock of metals available to fulfil the requirements of our customers in regards of quality and fast delivery. Material test certificates are available upon request. In addition stainless steel with specific properties e.g. with higher tensile strength or higher fine grain properties are deliverable as well. Stanless steel materials are deliverable in material thickness of 0.020mm – 2.0mm in steps of 0.010mm
Material | Min material thickness (mm) | Max material thickness (mm) |
---|---|---|
Stainless Steel ST37 Stahl | 0,010 | 2,0 |
1.4301 | 0,010 | 2,0 |
1.4310 | 1,00 | 2,0 |
1.4034 | 0,010 | 2,0 |
1.1248 | 0,010 | 2,0 |
1.1274 | 0,010 | 2,0 |
1.1203 | 0,010 | 2,0 |
1.4031 | 0,100 | 0,300 |
1.4404 | 0,010 | 2,0 |
1.4016 | ||
1.4571 | ||
1.4404 |
What sizes can we process?
We process parts with a working surface of maximum 600 x 800mm.
Which tolerances do we guarantee?
We guarantee a contour accuracy of
- ±5 µm up to 50 µm material thickness
- ±10 µm up to 100 µm material thickness
- ±20 µm up to 600 µm material thickness
- ±50 µm > 600 µm material thickness
and a position accuracy of ±10 µm. Besides that we measure the parts and document it in a certificate or measuring protocol.
What kind of rework steps do we offer?
LaserJob has the ability to deliver the manufactured parts burr free or with a minimum burr due to unique properties of the cutting quality. If special requirements are required we offer rework treatments in form of
Brushing
With a CNC controlled brushing system, the cutting burrs on the laser exit side are removed. The brush head moves in all four directions, covering the entire area.
Polishing or manual grinding
If the parts are delicate and below a material thickness of 0.2 mm, we recommend manual grinding of the parts.
Grinding (Trovalizing)
With a capacity of 5 or 10ltr/container all parts can be treated with a material thickness of 0.5 mm and a maximum size of 50 x 50 mm.